
	Installing RIOIO.SYS v1.01 device driver
	----------------------------------------
	At present because the RIOIO driver expects to be
	the only driver which has access to the parallel port
	at one time, any other drivers/services that access the
	parallel port must be stopped prior to installing the
	RIOIO.SYS device driver.
	For instance the driver PARPORT which is started by default
	by NT needs to be configured so that it is disabled on startup.
	This can be achieved by starting the 'Devices' utility
	located in the 'Control Panel'. Select 'Startup...' for
	the 'Parport' device and select the 'disabled' radio button,
	then click on 'Ok'.

	Execute the INRIOIO.BAT batch file which will do the
	following...

		. Copy RIOIO.SYS to NT's driver directory, which is at
		  %SystemRoot%\system32\drivers

		. Execute ADDREG.EXE which will install entries required
		  by the driver into the registry.

	Then restart your WinNT machine.

	The RIOIO device is now installed and ready to be used by
	the RIO.EXE application.

